VOOPOO Drag Kit And SMOK Morph Kit

  • VOOPOO Drag 2 Kit is the updated version of the original VOOPOO Drag kit, which consists of the Drag 2 box mod and the brand new Uforce T2 tank.VOOPOO Drag V2 Kit features a compact size and smooth design, which is powered by dual high-rate 18650 batteries and maximum output can be reached to 177W.In addition to its high-end technical design, which is very streamlined with a colorful resin panel on one side, the mod also looks modern. On the control face, you will see a crystal clear OLED display with a menu that displays the current battery level, mode, resistance or voltage, and wattage. Paired with New Uforce T2 tank, the Drag 2 kit will provide better vaping experience. The tank utilizes new N3 mesh coil to achieve purer flavor and stronger clouds.

    Technical Data:
    Size: 88.3*51*26.5mm
    Material: Stainless Steel+ Resin
    Power Range:5W - 177W
    Tank Capacity: 5ml
    Resting Current: ≤10uA
    Output Voltage: 0V - 7.5V
    Output Current: 0A - 40A
    Battery: Dual 18650 Batteries
    Resistance Range: 0.05Ω - 5.0Ω
    Temperature Range: 100-315°C/ 200-600°F
    Mod Material: Zinc Alloy & Resin
    Thread: 510

    Package Includes:
    1 x DRAG 2 177W
    1 x UFORCE T2(5ml)V1 x UFROCE U2(pre-installed)
    1 x UFROCE N3(included)
    1 x Glass Tube(3.5ml)
    7 x Sealing O-Ring
    1 x USB Cable
    1 x GENE Chip Card
    1 x User Manual
    1 x Warranty Card

    VOOPOO Drag Mini Kit is a tiny and compact vape kit with a built-in GENE Fit Chip for battery-efficient outputs. Which is powered by large 4400mAh built-in battery and maximum output can be reached to 117W for better MTL & DL flavors. Compared to VOOPOO Drag, Drag Mini features a much portable and ergonomic design, measured 81.5mm by 48.5mm by 25.5mm. Powered by advanced VOOPOO GENE.FIT chipset, it supports innovative FIT mode, offering both long battery life and intelligent mathced with tanks. The innovative FIT mode, brings both security and convenience to vapors. Drag mini is samll in size, but FIT from the inside out. Apart from the innovation in its brain, GENE.FIT chip is secured by a V0 class fireproofing bridge to block dust, liquid or burnout. Our vision has alwawys been to create the device that is of high performance, long endurance and best protection for vapors. Fit is a mode that can protect tanks to the most with its intelligent matches of FIT 1/2/3. With the equivalent power of 2 18650 batteries, DRAG mini is almost TWICE as strong in battery life comparing to similar devices.It is paired with VOOPOO Uforce T2 Tank, which is 5ml e-juice capacity to satisfy your daily needed.Powered by a built-in battery with the newly updated chipset, it also supports VW/ VPC/TC/TCR/BYPASS mode.For a better portable experience, DRAG nimi is compact in structure, ergonomic in shaping and powerful in battery life. DRAG mini is employed with solid specular finishing, with multiple resin plates to chooser from, there ae 8 colors are available: Atrovirens, Rhodonite, Coral, Prussian Blue, Lava, Prussian, Purple, Lime.

    Technical Data:
    Size: 81.5 x 48.5 x 25.5mm
    Tank Capacity: 5ml
    Resting Current: ≤10uA
    Output Voltage: 0V - 7.5V
    Output Current: 0A - 30A
    Battery: 4400mAh (Built-in Battery)
    Resistance Range: 0.05Ω - 5.0Ω
    Temperature Range: 100-315°C/ 200-600°F
    Output Mode: VW/ VPC/TC/TCR/BYPASS
    Thread: 510 Thread
    Tank Material: Stainless Steel
    Mod Material: Zinc Alloy & Resin

    Package Includes:
    1 x DRAG mini 117W
    1 x UFORCE T2(5ml)
    1 x UFROCE P2(pre-installed)
    1 x UFROCE N1(included)
    1 x Glass Tube(3.5ml)
    7 x Sealing O-Ring
    1 x USB Cable
    1 x GENE Chip Card
    1 x User Manual
    1 x Warranty Card

    SMOK Morph Kit is a new box mod kit which deploys various technological advances in high-power vape system. Powered by dual high amp 18650 batteries (Sold Separately), the SMOK Morph integrates an intelligent IQ-S Chipset with instant 0.001s firing capability to enhance the taste of your every puff, can reach up to 219W max output with accurate temperature control and preheat wattage modes. Inheriting from the famous Alien Mod, the SMOK Morph Mod features an ergonomic chassis with large 1.9 inch HD Touch Screen and beautiful resin panel in the back for an overall stunning looking. As for the TF2019 Tank, it features a 5ml E-liquid capacity with bulb Pyrex glass tube, rotary top filling system and dual adjustable bottom airflow control. Utilized the innovative plug-pull mesh coil system and antibacterial medical cotton, the SMOK Morph Kit will provide a flavorful and ultimate vaping.

    Technical Data:

    SMOK Morph Mod
    Material: Zinc Alloy
    Output Wattage: 1 - 219W
    Battery: 2* 18650 Battery (Sold Separately)
    Screen: 1.9 Inch Colorful HD Touch Screen
    Output Voltage: 0.5 - 8.2V
    Resistance Range: 0.1 - 2.5ohm (VW Mode) / 0.05 - 2.0ohm (TC Mode)
    Output Mode: VW / TC(Ti/Ni/SS)
    Temperature Range: 200 - 600℉ / 100 - 315℃
    Protections: Short Circuit/Over Heating/Over Discharge Protections
    Charging: Micro USB Charging
    Thread: 510

    TF2019 Tank
    Diameter: 25mm
    Material: Stainless Steel+Pyrex Glass
    Capacity: 5.0ml
    Airflow: Adjustable Dual Bottom Airflow Control
    Refill: Top Filling
    Thread: 510

    Package Includes:
    1 x Morph 219W Mod(no cells)
    1 x TF2019 Tank
    1 x Replacement Glass Tube
    1 x USB Cable
    1 x User Manual
    Spare Parts